
Electrical Repair
Breakers that keep tripping, dead outlets, flickering lights or half the house without power.

Demo photo
Ask the expert
Breaker, outlet or lighting trouble? Find out what to do next
This box uses AI. Your conversation is saved so our team can read it and reply. Privacy policy
Services

Breakers that keep tripping, dead outlets, flickering lights or half the house without power.

A panel (the breaker box) sized for your home by a load calculation.

Older wiring checked, repaired or replaced, including aluminum and knob-and-tube wiring.

Warm or loose outlets, more outlets, and safety outlets that cut power when current leaks.

Flickering lights, LED dimmers, recessed lights and ceiling fans on the right box.

A home charger for your electric vehicle (EV), with a check that your panel has room.

Standby generators, transfer switches and whole-home surge protection.

Hardwired smoke alarms and carbon monoxide (CO) alarms, replaced and linked together.
Why Teadfast
Most repairs are booked within 2 business days.
Demo example: same-day repair visits are often possible on weekdays when you book before noon.
General liability insurance for damage to your home, and workers' compensation for workers hurt on the job.
Demo example: 1 year on parts and labor for repairs.
Service area
Pinewell and Montgomery County, Texas, including Conroe, The Woodlands, Magnolia and Willis.
All service areasDemo example. On your site, this links to your verified Google Business Profile.
Reviews
Sample rating: 4.8 out of 5 from 81 reviews.
Demo example. On your site, this shows your real Google reviews.
Half the house lost power and no breaker had tripped. The electrician found a loose connection on one of the two supply lines and fixed it in one visit.
They did a load calculation before anything else. Our panel had room, so no upgrade was needed. The Level 2 charger is on its own circuit, and they handled the permit.
We wanted backup power after a long outage. They installed a standby generator and explained how it runs its own self-test. It started by itself during the next outage.
Questions
Maybe. A Level 2 charger needs a dedicated circuit, one that feeds only the charger, at 240 volts. Some homes do not have enough spare capacity for it. A load calculation adds up your home's power use and shows whether the panel (the breaker box) can supply it. If the panel cannot, an electrician may suggest a panel upgrade or a load-shedding device. That device cuts power to chosen circuits when current passes a set limit. Teadfast Electric installs home EV chargers and their circuits. Chargers we install: ChargePoint, Emporia, The customer's own charger. We do a load calculation, which adds up the power your home uses, before we install a charger. The exact price comes after the electrician sees the job at the visit. Estimates for larger projects are free, with no obligation.
A breaker (a safety switch in the breaker box) cuts power when something goes wrong on its wiring. Common causes are too much load, touching wires, current leaks or a worn breaker. Never touch the panel while you are wet or standing in water; call an electrician. Unplug devices you do not need, then push the breaker fully to Off and back to On. Breakers that trip often are a warning sign of faulty wiring. If it trips again after one reset, a licensed electrician should find the cause. Teadfast Electric finds and fixes electrical problems. Most repairs are booked within 2 business days. Demo example: same-day repair visits are often possible on weekdays when you book before noon.
One flickering light may just have a loose bulb. Turn it off, then twist the bulb until it sits firmly. The wrong bulb, or an LED (low-energy) bulb on an old dimmer, can also flicker. Flickering in one room can mean a loose wire. Popping with the flicker is arcing (power jumping a gap), which can start fires. A licensed electrician should check flickering with popping, with no known cause, or that keeps going. Teadfast Electric finds and fixes electrical problems. Most repairs are booked within 2 business days.
A buzzing outlet most likely has a loose connection, or the outlet has gone bad. Heat can build up there. A very low hum from the panel (the breaker box) can be normal. A loud buzz may mean a loose part or wire. A bad breaker may also fail to switch off when overloaded. A licensed electrician should check a buzzing outlet or a loud buzz from the panel. Teadfast Electric finds and fixes electrical problems. Most repairs are booked within 2 business days.
Level 1 plugs into a standard 120-volt outlet on a dedicated circuit, one that feeds only that outlet. Level 1 adds about 5 miles of range per hour. Level 2 uses 240 volts and adds about 25 miles of range per hour. Many EV (electric vehicle) owners meet daily needs by charging overnight from a Level 1 outlet on a dedicated circuit. Level 2 needs its own dedicated circuit, run by a licensed electrician. Teadfast Electric installs home EV chargers and their circuits. Chargers we install: ChargePoint, Emporia, The customer's own charger. We do a load calculation, which adds up the power your home uses, before we install a charger. Estimates for larger projects are free, with no obligation.
Demo example: a repair visit has a diagnostic fee, and it goes toward the repair if you go ahead.
Leave your name and number, and tell us what you need.
Demo site: this form sends nothing.